Extrusion & Post
12 مشاهدة
POE extruder screw severe wear
ظاهرة المشكلة
After 200h of POE extrusion, screw and barrel wear reaches 0.5mm
تحليل الأسباب
Filler causes large wear to the screw; screw material hardness insufficient, not nitrided; processing temperature too high causes POE to adhere to the screw, aggravating wear
الحل
1) Use nitrided screw or bimetallic screw SK-2 alloy; 2) Lower processing temperature to reduce adhesive wear; 3) Treat filler with coupling agent to reduce friction; 4) Regularly check wear, replace promptly when >0.3mm
الخلاصة الأساسية
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!