Material Drying
6 مشاهدة
Radial silver streaks on product surface
ظاهرة المشكلة
Silver-white streaks radiating outward from the gate; the product appearance is severely defective
تحليل الأسباب
The material contains moisture or low-molecular volatiles; excessive temperature in the rear barrel section causes a component to decompose and produce gas; insufficient back pressure fails to squeeze the gas out of the melt
الحل
Strictly dry to moisture <0.05%; reduce the rear barrel section temperature to reduce decomposition; increase back pressure to 5-10MPa to squeeze out gas
الخلاصة الأساسية
Silver streaks are a direct manifestation of gas entrained in the melt or decomposition gas
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!