Material Drying
7 visualizações
Radial silver streaks on product surface
Fenómeno do problema
Silver-white streaks radiating outward from the gate; the product appearance is severely defective
Análise das causas
The material contains moisture or low-molecular volatiles; excessive temperature in the rear barrel section causes a component to decompose and produce gas; insufficient back pressure fails to squeeze the gas out of the melt
Solução
Strictly dry to moisture <0.05%; reduce the rear barrel section temperature to reduce decomposition; increase back pressure to 5-10MPa to squeeze out gas
Conclusão principal
Silver streaks are a direct manifestation of gas entrained in the melt or decomposition gas
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!