Material Drying
3 Aufrufe
Radial silver streaks on product surface
Problembeschreibung
Silver-white streaks radiating outward from the gate; the product appearance is severely defective
Ursachenanalyse
The material contains moisture or low-molecular volatiles; excessive temperature in the rear barrel section causes a component to decompose and produce gas; insufficient back pressure fails to squeeze the gas out of the melt
Lösung
Strictly dry to moisture <0.05%; reduce the rear barrel section temperature to reduce decomposition; increase back pressure to 5-10MPa to squeeze out gas
Wichtigste Erkenntnis
Silver streaks are a direct manifestation of gas entrained in the melt or decomposition gas
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!