Injection Molding
3 Aufrufe
HDPE '2079851475616104452 sink marks
Problembeschreibung
Depressions at thick-walled areas and behind ribs.
Ursachenanalyse
High shrinkage + insufficient holding pressure compensation; the gate freezes too early.
Lösung
①Increase holding pressure and time; ②enlarge the gate; ③rib thickness ≤60% of wall thickness; ④reduce material in thick walls.
Wichtigste Erkenntnis
Sink marks are tackled with both holding pressure and structural material reduction.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!