Injection Molding
10 Aufrufe
HDPE injection molded product sink marks - thick-walled type
Problembeschreibung
Thick-walled HDPE parts have severe surface depressions.
Ursachenanalyse
Excessive wall thickness means large shrinkage, which conventional holding pressure cannot compensate; PP/PE thick-walled parts should be structurally material-reduced.
Lösung
①Core out thick walls to reduce material; ②gate near the thick wall; ③increase holding pressure; ④strengthen cooling.
Wichtigste Erkenntnis
For thick-wall sink marks, structural material reduction is prioritized.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!