Injection Molding
14 visualizações
HDPE injection molded product sink marks - thick-walled type
Fenómeno do problema
Thick-walled HDPE parts have severe surface depressions.
Análise das causas
Excessive wall thickness means large shrinkage, which conventional holding pressure cannot compensate; PP/PE thick-walled parts should be structurally material-reduced.
Solução
①Core out thick walls to reduce material; ②gate near the thick wall; ③increase holding pressure; ④strengthen cooling.
Conclusão principal
For thick-wall sink marks, structural material reduction is prioritized.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!