Injection Molding
13 مشاهدة
HDPE injection molded product sink marks - thick-walled type
ظاهرة المشكلة
Thick-walled HDPE parts have severe surface depressions.
تحليل الأسباب
Excessive wall thickness means large shrinkage, which conventional holding pressure cannot compensate; PP/PE thick-walled parts should be structurally material-reduced.
الحل
①Core out thick walls to reduce material; ②gate near the thick wall; ③increase holding pressure; ④strengthen cooling.
الخلاصة الأساسية
For thick-wall sink marks, structural material reduction is prioritized.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!