Injection Molding
15 visualizaciones
HDPE injection molded product sink marks - thick-walled type
Fenómeno del problema
Thick-walled HDPE parts have severe surface depressions.
Análisis de la causa
Excessive wall thickness means large shrinkage, which conventional holding pressure cannot compensate; PP/PE thick-walled parts should be structurally material-reduced.
Solución
①Core out thick walls to reduce material; ②gate near the thick wall; ③increase holding pressure; ④strengthen cooling.
Conclusión clave
For thick-wall sink marks, structural material reduction is prioritized.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!