Molds & Tooling
3 Aufrufe
EAA angle deviation
Problembeschreibung
EAA product angle deviation >1° exceeding ±0.5° tolerance
Ursachenanalyse
Uneven shrinkage causing angle change; mold angle design did not consider EAA shrinkage compensation; product deformation during demolding
Lösung
1) Pre-compensate mold angle for EAA shrinkage rate; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage difference
Wichtigste Erkenntnis
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!