Molds & Tooling
7 visualizações
EAA angle deviation
Fenómeno do problema
EAA product angle deviation >1° exceeding ±0.5° tolerance
Análise das causas
Uneven shrinkage causing angle change; mold angle design did not consider EAA shrinkage compensation; product deformation during demolding
Solução
1) Pre-compensate mold angle for EAA shrinkage rate; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage difference
Conclusão principal
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!