Molds & Tooling
5 görüntüleme
EAA angle deviation
Sorun Belirtisi
EAA product angle deviation >1° exceeding ±0.5° tolerance
Neden Analizi
Uneven shrinkage causing angle change; mold angle design did not consider EAA shrinkage compensation; product deformation during demolding
Çözüm
1) Pre-compensate mold angle for EAA shrinkage rate; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage difference
Temel Çıkarım
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!