Material Drying
3 Aufrufe
Silver streaks caused by moisture in EEA processing
Problembeschreibung
White silver streaks appearing on the EEA injection molded product surface
Ursachenanalyse
Raw material contains moisture >0.05% vaporizing during high-temperature processing forming bubbles stretched into silver streaks; insufficient drying or water vapor condensation in the hopper
Lösung
1) Dry the raw material at 80°C for 3-4h to moisture <0.02%; 2) Increase back pressure 0.5-1MPa for venting; 3) Reduce injection speed to avoid air entrapment; 4) Heat the hopper to prevent water vapor condensation
Wichtigste Erkenntnis
Silver streaks are caused by moisture vaporization and stretching; drying and venting are the main countermeasures
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!