Material Drying
7 visualizações
Silver streaks caused by moisture in EEA processing
Fenómeno do problema
White silver streaks appearing on the EEA injection molded product surface
Análise das causas
Raw material contains moisture >0.05% vaporizing during high-temperature processing forming bubbles stretched into silver streaks; insufficient drying or water vapor condensation in the hopper
Solução
1) Dry the raw material at 80°C for 3-4h to moisture <0.02%; 2) Increase back pressure 0.5-1MPa for venting; 3) Reduce injection speed to avoid air entrapment; 4) Heat the hopper to prevent water vapor condensation
Conclusão principal
Silver streaks are caused by moisture vaporization and stretching; drying and venting are the main countermeasures
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!