Molds & Tooling
3 Aufrufe
EEA Insufficient Flatness
Problembeschreibung
EEA flat product flatness >0.5mm/100mm, warpage
Ursachenanalyse
EEA shrinkage rate large and different in each direction; mold cooling uneven; residual stress release causes continuous warpage
Lösung
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Anneal to release residual stress
Wichtigste Erkenntnis
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!