Molds & Tooling
7 visualizações
EEA Insufficient Flatness
Fenómeno do problema
EEA flat product flatness >0.5mm/100mm, warpage
Análise das causas
EEA shrinkage rate large and different in each direction; mold cooling uneven; residual stress release causes continuous warpage
Solução
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Anneal to release residual stress
Conclusão principal
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!