Molds & Tooling
8 visualizaciones
EEA Insufficient Flatness
Fenómeno del problema
EEA flat product flatness >0.5mm/100mm, warpage
Análisis de la causa
EEA shrinkage rate large and different in each direction; mold cooling uneven; residual stress release causes continuous warpage
Solución
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Anneal to release residual stress
Conclusión clave
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!