Molds & Tooling
3 Aufrufe
Internal shrinkage voids of PU
Problembeschreibung
Shrinkage voids of 0.5-2mm diameter in the center of PU thick-walled products
Ursachenanalyse
After cooling of thick-walled area, interior shrinks but surface already solidified, cannot be fed; holding time insufficient, gate freezes too early
Lösung
1) Extend holding time until the gate is completely frozen; 2) Increase gate size to delay freezing; 3) Product design to reduce wall thickness differences
Wichtigste Erkenntnis
Shrinkage voids are caused by thick-wall shrinkage and insufficient holding; extending holding is key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!