Injection Molding
10 Aufrufe
Jetting in PBT Injection Mold Cavity
Problembeschreibung
The melt enters the cavity in a high-speed jet instead of normal filling flow.
Ursachenanalyse
The gate size is too small, producing jetting; the injection speed is too high; the distance between the gate and the cavity wall is insufficient, causing the melt to shoot straight.
Lösung
Increase the gate size or use a fan gate; reduce the injection speed in the gate area; change the gate position so that the melt hits the wall and decelerates.
Wichtigste Erkenntnis
PBT jetting disrupts the normal filling pattern.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!