Injection Molding
13 مشاهدة
Jetting in PBT Injection Mold Cavity
ظاهرة المشكلة
The melt enters the cavity in a high-speed jet instead of normal filling flow.
تحليل الأسباب
The gate size is too small, producing jetting; the injection speed is too high; the distance between the gate and the cavity wall is insufficient, causing the melt to shoot straight.
الحل
Increase the gate size or use a fan gate; reduce the injection speed in the gate area; change the gate position so that the melt hits the wall and decelerates.
الخلاصة الأساسية
PBT jetting disrupts the normal filling pattern.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!