Injection Molding
15 visualizaciones
Jetting in PBT Injection Mold Cavity
Fenómeno del problema
The melt enters the cavity in a high-speed jet instead of normal filling flow.
Análisis de la causa
The gate size is too small, producing jetting; the injection speed is too high; the distance between the gate and the cavity wall is insufficient, causing the melt to shoot straight.
Solución
Increase the gate size or use a fan gate; reduce the injection speed in the gate area; change the gate position so that the melt hits the wall and decelerates.
Conclusión clave
PBT jetting disrupts the normal filling pattern.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!