Injection Molding
14 visualizações
Jetting in PBT Injection Mold Cavity
Fenómeno do problema
The melt enters the cavity in a high-speed jet instead of normal filling flow.
Análise das causas
The gate size is too small, producing jetting; the injection speed is too high; the distance between the gate and the cavity wall is insufficient, causing the melt to shoot straight.
Solução
Increase the gate size or use a fan gate; reduce the injection speed in the gate area; change the gate position so that the melt hits the wall and decelerates.
Conclusão principal
PBT jetting disrupts the normal filling pattern.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!