Injection Molding
10 Aufrufe
Bonding Strength Between PBT Injection-Molded Parts and Metal Inserts
Problembeschreibung
When PBT overmolds metal terminals or inserts, the interfacial bonding strength does not meet the standard.
Ursachenanalyse
PBT adheres poorly to metal surfaces, and the large molding shrinkage causes interfacial debonding; the metal inserts are not preheated.
Lösung
Preheat the metal inserts to 100-150°C; knurl or groove the surface to increase mechanical anchoring; apply an adhesion promoter.
Wichtigste Erkenntnis
The bonding between PBT and metal inserts is a key quality of electrical connectors.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!