Injection Molding
12 görüntüleme
Bonding Strength Between PBT Injection-Molded Parts and Metal Inserts
Sorun Belirtisi
When PBT overmolds metal terminals or inserts, the interfacial bonding strength does not meet the standard.
Neden Analizi
PBT adheres poorly to metal surfaces, and the large molding shrinkage causes interfacial debonding; the metal inserts are not preheated.
Çözüm
Preheat the metal inserts to 100-150°C; knurl or groove the surface to increase mechanical anchoring; apply an adhesion promoter.
Temel Çıkarım
The bonding between PBT and metal inserts is a key quality of electrical connectors.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!