Injection Molding
13 مشاهدة
Bonding Strength Between PBT Injection-Molded Parts and Metal Inserts
ظاهرة المشكلة
When PBT overmolds metal terminals or inserts, the interfacial bonding strength does not meet the standard.
تحليل الأسباب
PBT adheres poorly to metal surfaces, and the large molding shrinkage causes interfacial debonding; the metal inserts are not preheated.
الحل
Preheat the metal inserts to 100-150°C; knurl or groove the surface to increase mechanical anchoring; apply an adhesion promoter.
الخلاصة الأساسية
The bonding between PBT and metal inserts is a key quality of electrical connectors.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!