Injection Molding
15 visualizaciones
Bonding Strength Between PBT Injection-Molded Parts and Metal Inserts
Fenómeno del problema
When PBT overmolds metal terminals or inserts, the interfacial bonding strength does not meet the standard.
Análisis de la causa
PBT adheres poorly to metal surfaces, and the large molding shrinkage causes interfacial debonding; the metal inserts are not preheated.
Solución
Preheat the metal inserts to 100-150°C; knurl or groove the surface to increase mechanical anchoring; apply an adhesion promoter.
Conclusión clave
The bonding between PBT and metal inserts is a key quality of electrical connectors.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!