Extrusion & Post
3 visualizaciones
HDPE pipe ovality out of tolerance
Fenómeno del problema
The pipe cross-section is elliptical, affecting welding and laying.
Análisis de la causa
Insufficient vacuum sizing, uneven cooling, or mismatch between haul-off speed and extrusion speed; the self-weight sag of large-diameter pipes also aggravates the ovality.
Solución
①Adjust the vacuum degree of the vacuum tank; ②ensure uniform circumferential cooling of the pipe (uniform spraying/immersion); ③synchronize extrusion and haul-off speeds; ④calibrate the sizing sleeve dimensions.
Conclusión clave
Ovality = a synchronization problem of sizing + cooling + haul-off.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!