Injection Molding
7 visualizaciones
HDPE '2079851475616104452 warpage
Fenómeno del problema
HDPE injection molded parts warp after ejection; common in drum lids and turnover crates.
Análisis de la causa
HDPE has a high shrinkage rate (1.5%~3%) and strong crystallization directionality; uneven cooling and orientation cause differential shrinkage.
Solución
①Balance the mold temperature; ②extend cooling; ③lower the holding pressure; ④optimize the gate position; ⑤homogenize the wall thickness.
Conclusión clave
HDPE '2079851475616104452 warpage = a cooling balance lesson for high-shrinkage materials.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!