Injection Molding
6 visualizações
HDPE '2079851475616104452 warpage
Fenómeno do problema
HDPE injection molded parts warp after ejection; common in drum lids and turnover crates.
Análise das causas
HDPE has a high shrinkage rate (1.5%~3%) and strong crystallization directionality; uneven cooling and orientation cause differential shrinkage.
Solução
①Balance the mold temperature; ②extend cooling; ③lower the holding pressure; ④optimize the gate position; ⑤homogenize the wall thickness.
Conclusão principal
HDPE '2079851475616104452 warpage = a cooling balance lesson for high-shrinkage materials.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!