Molds & Tooling
7 visualizaciones
PCABS Shrinkage Voids and Dents
Fenómeno del problema
PC/ABS shrinkage voids and dents are caused by insufficient mold filling, comprehensively adjusted by temperature, holding pressure, and gate.
Análisis de la causa
PC/ABS shrinkage voids are caused by insufficient mold filling; mold temperature, material temperature, and flow; holding pressure time, pressure, and speed; gate size; runner heating; comprehensive factors.
Solución
①Increase mold and material temperature; ②extend holding pressure time; ③increase injection pressure and speed; ④enlarge gate size; ⑤heat gates and runners.; after adjustment, continuously sample to verify the effect, and resume mass production after confirming stability
Conclusión clave
Systematic adjustment of PCABS shrinkage voids is the standard path; temperature, holding pressure, and gate are equally important; runner heating is a refined means.; after confirming effectiveness, fix the parameters and practices into the work instruction to prevent recurrence
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!