Extrusion & Post
14 visualizaciones
EEA Internal Delamination Cracking
Fenómeno del problema
EEA products internally delaminate, cracking along the interface
Análisis de la causa
Poor interfacial bonding between EEA and incompatible fillers or blend components; cooling shrinkage differences cause interlayer stress
Solución
1) Use compatibilizer to improve interfacial bonding; 2) Uniform cooling to reduce interlayer stress; 3) Reduce the addition of incompatible components
Conclusión clave
Internal delamination is caused by poor interface and shrinkage differences; compatibilizer and uniform cooling are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!