Material Drying
8 visualizaciones
Internal Voids of CMC
Fenómeno del problema
Voids of 1-3mm appear inside CMC products, concentrated in the center of thick walls
Análisis de la causa
Holding is insufficient and the center of the thick wall is not compacted; entrapped gas cannot be discharged; raw material moisture vaporizes
Solución
1)Increase holding pressure 60-80MPa for full compaction; 2)Increase mold venting; 3)Fully dry raw material
Conclusión clave
Internal voids are caused by insufficient holding and gas entrapment; high-pressure holding and venting are the key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!