Extrusion & Post
14 visualizaciones
DSTDP extruder screw severe wear
Fenómeno del problema
After 200h of DSTDP extrusion, screw and barrel wear reaches 0.5mm
Análisis de la causa
Filler wears the screw greatly; screw material hardness insufficient, not nitrided; processing temperature on the high side causes DSTDP to adhere to the screw aggravating wear
Solución
1) Use nitrided screw or bimetallic screw SK-2 alloy; 2) lower processing temperature to reduce adhesive wear; 3) treat filler with coupling agent to reduce friction; 4) regularly check wear, replace in time when >0.3mm
Conclusión clave
Screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!