Extrusion & Post
14 visualizaciones
MP extruded film longitudinal streaks
Fenómeno del problema
MP extruded film surface has continuous streaks along the extrusion direction, width 1-3mm
Análisis de la causa
die lip locally damaged or gap uneven; unstable flow from the melt stagnation zone inside the die; pressure fluctuation at the screw front end
Solución
1) check die lip flatness and gap uniformity ±0.01mm; 2) clean the die interior to remove carbonized material in stagnation zones; 3) install a gear pump on the extruder to stabilize melt pressure; 4) polish die lip to Ra<0.1μm
Conclusión clave
longitudinal streaks are caused by die defects and pressure fluctuation; die maintenance and pressure stability are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!