Extrusion & Post
14 visualizaciones
MP extruder screw severe wear
Fenómeno del problema
after 200h of MP extrusion, screw and barrel wear reaches 0.5mm
Análisis de la causa
filler causes large screw wear; screw material hardness insufficient, not nitrided; processing temperature high causing MP adhesion to the screw, aggravating wear
Solución
1) use a nitrided screw or bimetallic screw SK-2 alloy; 2) lower processing temperature to reduce adhesive wear; 3) treat filler with coupling agent to reduce friction; 4) regularly check wear, replace promptly when >0.3mm
Conclusión clave
screw wear is caused by filler friction and adhesion; wear-resistant screw and temperature control are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!