Molding Process 4 visualizaciones

POE toughened PP impact strength not up to standard

Fenómeno del problema

POE/PP blend impact only 3-5kJ/m², below the 10kJ/m² target

Análisis de la causa

POE dispersed phase particle size >1μm too large instead of 0.2-0.5μm for effective toughening; addition amount <10wt% insufficient

Solución

1) POE 15-20wt%; 2) Twin-screw 300-400rpm; 3) POE-g-MAH 1-3wt%; 4) Control cooling to avoid coarsening

Conclusión clave

The key to POE toughened PP is dispersed phase 0.2-0.5μm and interfacial adhesion

POE toughened PPimpact strengthdispersed phase particle sizePOE-g-MAHsilver streak shear band

¿Le ha resultado útil?

0 personas encontraron esto útil