Injection Molding
3 visualizaciones
POE internal stress concentration severe
Fenómeno del problema
POE product internal stress >15MPa causing cracking during storage
Análisis de la causa
Injection speed too fast, orientation stress large; uneven cooling freezes thermal stress; improper gate position concentrates flow orientation
Solución
1) Reduce injection speed to reduce orientation; 2) Uniform mold temperature to reduce thermal stress; 3) Anneal 80°C/4h to release stress; 4) Optimize gate position
Conclusión clave
Internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling and annealing are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!