Injection Molding
15 visualizaciones
Flash at the Parting Line of PBT
Fenómeno del problema
Flash and burrs appear at the parting line of PBT products.
Análisis de la causa
The melt viscosity of PBT is relatively low and the fluidity is good, so it easily overflows from the parting line; the clamping force is insufficient; the injection pressure is too high.
Solución
Increase the clamping force; repair the flatness of the parting line; appropriately reduce the injection pressure; use a precision parting line design.
Conclusión clave
PBT has good fluidity and is prone to flash, which needs attention.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!