Injection Molding
14 visualizações
Flash at the Parting Line of PBT
Fenómeno do problema
Flash and burrs appear at the parting line of PBT products.
Análise das causas
The melt viscosity of PBT is relatively low and the fluidity is good, so it easily overflows from the parting line; the clamping force is insufficient; the injection pressure is too high.
Solução
Increase the clamping force; repair the flatness of the parting line; appropriately reduce the injection pressure; use a precision parting line design.
Conclusão principal
PBT has good fluidity and is prone to flash, which needs attention.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!