Material Analysis
15 visualizaciones
High density of PET extruded foamed sheet
Fenómeno del problema
PET foamed sheet density higher than target value (e.g., >0.5g/cm³), unsatisfactory weight reduction effect.
Análisis de la causa
Insufficient foaming agent addition or incomplete decomposition, foaming temperature too low with insufficient gas expansion, insufficient melt strength with gas escaping.
Solución
Increase foaming agent dosage or switch to high-efficiency foaming agent; increase foaming temperature; use chain extenders to increase melt strength; optimize the die head.
Conclusión clave
PET foaming density control requires synergy of melt strength, foaming agent, and process.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!