Material Analysis
14 visualizações
High density of PET extruded foamed sheet
Fenómeno do problema
PET foamed sheet density higher than target value (e.g., >0.5g/cm³), unsatisfactory weight reduction effect.
Análise das causas
Insufficient foaming agent addition or incomplete decomposition, foaming temperature too low with insufficient gas expansion, insufficient melt strength with gas escaping.
Solução
Increase foaming agent dosage or switch to high-efficiency foaming agent; increase foaming temperature; use chain extenders to increase melt strength; optimize the die head.
Conclusão principal
PET foaming density control requires synergy of melt strength, foaming agent, and process.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!