Material Drying
8 visualizaciones
PAEK product bubbles/internal pores
Fenómeno del problema
Internal bubbles appear in PAEK injection molded products, affecting mechanical properties
Análisis de la causa
Insufficient drying, moisture content exceeding the standard (PAEK requires 150-180°C/2-3h drying); at processing temperatures of 350-400°C, trace moisture vaporizes sharply
Solución
Strictly dry to moisture content <0.02%; reduce screw speed; increase holding pressure time and pressure
Conclusión clave
PAEK is similar to PEEK in that trace moisture causes bubbles at extremely high processing temperatures
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!