Material Drying
7 visualizações
PAEK product bubbles/internal pores
Fenómeno do problema
Internal bubbles appear in PAEK injection molded products, affecting mechanical properties
Análise das causas
Insufficient drying, moisture content exceeding the standard (PAEK requires 150-180°C/2-3h drying); at processing temperatures of 350-400°C, trace moisture vaporizes sharply
Solução
Strictly dry to moisture content <0.02%; reduce screw speed; increase holding pressure time and pressure
Conclusão principal
PAEK is similar to PEEK in that trace moisture causes bubbles at extremely high processing temperatures
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!