Extrusion & Post 10 조회수

DSTDP extrusion rough surface

문제 현상

DSTDP extruded product surface roughness Ra>5μm, exceeding requirements

원인 분석

Extrusion temperature on the low side <160°C, melt flow unstable; die inner wall rough or damaged; DSTDP melt elasticity, extrusion swell uneven

해결 방법

1) Raise extrusion temperature to 160-200°C; 2) polish die inner wall Ra<0.4μm; 3) reduce extrusion rate 10-15%; 4) add 0.3-0.5wt% external lubricant

핵심 요약

Rough surface is caused by low-temperature extrusion and die defects; raising temperature and polishing the die are the core countermeasures

DSTDP extrusionrough surfacedie polishingextrusion temperaturemelt elasticity

이 정보가 도움이 되었나요?

0 명이 도움이 되었다고 합니다