Extrusion & Post 13 visualizações

DSTDP extrusion rough surface

Fenómeno do problema

DSTDP extruded product surface roughness Ra>5μm, exceeding requirements

Análise das causas

Extrusion temperature on the low side <160°C, melt flow unstable; die inner wall rough or damaged; DSTDP melt elasticity, extrusion swell uneven

Solução

1) Raise extrusion temperature to 160-200°C; 2) polish die inner wall Ra<0.4μm; 3) reduce extrusion rate 10-15%; 4) add 0.3-0.5wt% external lubricant

Conclusão principal

Rough surface is caused by low-temperature extrusion and die defects; raising temperature and polishing the die are the core countermeasures

DSTDP extrusionrough surfacedie polishingextrusion temperaturemelt elasticity

Isto foi útil?

0 pessoas acharam isto útil