Extrusion & Post
4 조회수
Stringing problem in PETG 3D printing
문제 현상
During PETG FDM 3D printing, stringing and hair-like thin filaments are produced when the nozzle moves.
원인 분석
Printing temperature is on the high side; melt viscosity is too low and thin filaments are drawn out; retraction parameters are set improperly, with insufficient retraction distance or speed.
해결 방법
Reduce printing temperature to 220-235°C; increase retraction distance to 4-6mm and speed to 30-50mm/s; enable the wipe function.
핵심 요약
PETG 3D printing stringing is solved by lowering temperature and optimizing retraction parameters.
이 정보가 도움이 되었나요?
0 명이 도움이 되었다고 합니다
의견 주셔서 감사합니다!