Extrusion & Post
8 مشاهدة
Stringing problem in PETG 3D printing
ظاهرة المشكلة
During PETG FDM 3D printing, stringing and hair-like thin filaments are produced when the nozzle moves.
تحليل الأسباب
Printing temperature is on the high side; melt viscosity is too low and thin filaments are drawn out; retraction parameters are set improperly, with insufficient retraction distance or speed.
الحل
Reduce printing temperature to 220-235°C; increase retraction distance to 4-6mm and speed to 30-50mm/s; enable the wipe function.
الخلاصة الأساسية
PETG 3D printing stringing is solved by lowering temperature and optimizing retraction parameters.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!