Extrusion & Post
6 visualizaciones
Stringing problem in PETG 3D printing
Fenómeno del problema
During PETG FDM 3D printing, stringing and hair-like thin filaments are produced when the nozzle moves.
Análisis de la causa
Printing temperature is on the high side; melt viscosity is too low and thin filaments are drawn out; retraction parameters are set improperly, with insufficient retraction distance or speed.
Solución
Reduce printing temperature to 220-235°C; increase retraction distance to 4-6mm and speed to 30-50mm/s; enable the wipe function.
Conclusión clave
PETG 3D printing stringing is solved by lowering temperature and optimizing retraction parameters.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!