Extrusion & Post
14 visualizações
PC extrusion sheet temperature
Fenómeno do problema
【Problem Phenomenon】PC extruded sheet has bubbles or poor surface, improper temperature
Análise das causas
PC extrusion melt temperature 250-290℃, slightly lower than '2079851475616104452; raw material must be fully dried; die temperature affects the surface；During on-site troubleshooting, verify item by item according to this mechanism, and avoid blindly adjusting the machine based solely on experience
Solução
Dry at 120℃×3-4h before extrusion; melt temperature 250-290℃; die temperature matched；After adjustment, take continuous samples to verify the effect, and resume mass production only after confirming stability
Conclusão principal
PC extrusion dries first, melt temperature 250-290℃；After confirming effectiveness, solidify the parameters and practices into the work instruction to prevent recurrence；Include this case in the defect archive as a reference for troubleshooting similar problems in the future
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!