Molds & Tooling
7 visualizações
EVA surface gloss is poor
Fenómeno do problema
EVA product surface gloss <60%, below the 80% requirement, with dull appearance
Análise das causas
Rough mold surface Ra>0.4μm; high EVA crystallinity with surface microcrystals scattering light; improper cooling rate
Solução
1) Polish the mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Conclusão principal
Poor gloss is caused by rough mold and crystalline scattering; polishing the mold and controlling crystallization are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!